I started reorganizing the south wall of my basement workshop on Sunday afternoon, first, so that I could store a bit more lumber on my storage rack (the extra Oosta lumber!) … and second, so that I could clean up my old children’s workbench for my granddaughters to use when they come this summer. After […]
There is no plan to buy more stuff, but I’m collecting ideas for the wall behind my newly upgraded router table for the accessories. Previously I have either just hung the jigs, etc on the wall individually or put them in a drawer nearby with my table saw parts and jigs. Now that I finally […]
Since I now have a few more featherboards to use with my table saw and router table, it seemed like a good idea to add a couple T-Tracks. Most modern woodworking workshops now seem to use these anodized aluminum tracks for a variety of purposes … they will be helpful for hold downs on my […]
I really did have the best of intentions to used the new knobs from Rockler to upgrade my existing router table fence, but after putzing around with my 40 year old angled aluminum non-adjustable fence, decided that an upgrade from the Amazon Warehouse (Outlet) for $133.64 made sense — although I could be wrong? The […]
As mentioned previously, I ordered an inexpensive “knockoff brand” Dust Deputy cyclone gizmo to use primarily with my router table and DeWalt planer. I “cheaply” updated the lift mechanism so that I could continue to use my OLD heavy duty 3HP Ryobi router BUT adjust it quickly and accurately. The scissor-lift works amazingly well with […]
A couple of years ago when contemplating upgrading the dust collection equipment in my workshop … the urge passed. The old ShopSmith DC3300 was again cleaned and re-bagged … and still today the dusty basement shop continues to annoy me. Fast forward: Last week Rockler put their Dust Right FlexiPort Power Tool Hose Kit on […]
Before I archive clipped workshop tips and ideas to a computer folder (saved in a place I will never look again => #humor), ideas that I’ve snipped from a variety of library borrowed woodworking magazines, I’m going to save them to my blog. If I were sharing and posting correctly, I would footnote or at […]
Over weekend of snowy Bengal – Bills playoff football, I was able to get down to the workshop and continue working on a joint granddaughters’ birthdays present. The project required larger holes than I have a hole saw for and cutting it with a jigsaw would have left an imperfect hole. So … I used […]
Reading periodicals from the library on the computer is not really something I do … but last week while checking out a couple of ebooks (one avaiilable the other on a long hold), I looked at the latest issue of the Woodworkers Journal magazine and realized just how much the iPad app for reading digital […]
“A place for everything and everything in its place,” is probably not the most fitting idiom for my cluttered workshop, since the debatable originate has to do with “neatness” according to an Ohio Repository (Canton, Ohio) article by Charles A. Goodrich in 1827. Although with a little sleuthing, it has also been credited to Benjamin […]
The final steps of finishing the rocking chair for my granddaughter are finally getting done. The canvas strips of material have been added with a little flexible adhesive in the center and epoxy on the ends. The canvas material should do a couple things, first prevent the painted rockers from wearing to bare wood and […]
For a soon to tackle project in the woodworking workshop, I tinkered with my older plug cutter in order to hide the heads of a few drywall screws. For a test, I used contrasting wood just to see how much gap there was going to be – it looks as if it will work. To […]
For the lack of a better subject line, this will be called a Workshop Wednesday post … even though I’m rarely in the workshop on Wednesdays (it was last weekend). Anyway, I was busy making a jig to help cut the “cheap” (and I mean “cheaply made”) crown molding that I purchased from Wayfair for […]
After years of collecting a variety of tools and “tool” parts (bits, blades, etc), I’ve noticed that the mish-mash of storage containers have become even more interesting as the actual items being stored and saved (click photos for larger). Here are a few photos with a variety of storage items in a Where’s Waldo (or […]
It is time for a little more research on better dust and chip control in my basement workshop. Brenda can deal with the noise and giving me a place to escape, but she is not fond of the dust that makes its way upstairs – those with basement woodworking workshops know what I mean. I’ve […]
My basement woodworking shop is a dust-making mess in our house, but there isn’t much I can do about it now other than to improve how I collect and filter and keep dust from gravitating into the furnaces cold air returns and upstairs. In our previous house in Hudson Ohio, I was fortunate to have […]
Thrifty or maybe frugal is the word choice that I use, but occasionally “cheapskate” might be a better fit? I’ve used a 3-speed Jet Tools Air Filtration System to clean the air in my basement woodworking workshop to reduce the amount of dust. It works reasonable well but suspect a lot of dust still makes […]
It was a tiring week with the drip, drip, drip Coronavirus news and highly-reactive financial markets. Although frightening, investors rightly or wrongly responded with a selloff of historic proportions. The entire meltdown seemed more like hysteria and panic and had me wondering how our country and nation ever faced plagues, a weak economy due to […]
When we remodeled our kitchen in the spring of 2017, I disconnected the 40 amp 220 volt electric range that we originally had in the island, and dropped the capped wires through the floor and ceiling of my basement workshop. My intention was to eventually “drop” a 220 volt line so I would have a […]
While I was suppose to be cleaning up and throwing away junk that has taken over some of my basement woodworking shop, as usual ended up sidetracked in making a few jigs for my upcoming projects AND reorganized a couple of cabinets that were buried under boxes and clutter on a back wall. I moved […]
While talking with my good friend Mark Jones about accurately drilling pin holes to mount a few glass shelves in a tight space, he gave me a great idea to use a piece of peg board to align all the holes accurately. Thanks Mark, a great tip! But in my case, I didn’t have a […]
Twice this past week I used medical instruments in my workshop. The first repair was to use a non-needled syringe to suck out some moisture in a pump switch … thanks Brenda, it was handy (although I have used them before “with a needle” for delicate parts lubrication). Second, was to use the surgical instruments […]
This content is restricted.
This isn’t the first time I’ve admired the clean professional, but “make-able” jigs from Rockler. This taper jib would be great to have when and IF I decide to make nesting tables. I do already have a “questionable quality” … but adjustable … taper jig that I quickly made for the high chair project, but […]
A couple of my short “cheap” T-tracks arrived last week that I’m planning to use for either a router table or table saw jig … or both? I’m not sure exactly how I’m planning to integrate them yet, but I have been collecting a few idea. Initially I was going to use them for featherboard […]
One of the frustrations in setting up tools of any kind is to get the settings precisely adjusted quickly and accurately on the first or at least close to the first try. For years I’ve struggled with my old questionable router table (35 years old) and dislike a few of the set up items. I […]
This content is restricted.
My friend Jeff and I (same age) have been struggling with how to let things go that were either ours … and that we no longer need … or part of our family’s history? He has tons of books that he’s been donating to the local library, a storage unit with some of his mom’s […]
We’ve had several short-lived summer storms blasting through this year. Often I wrap up my sun sail in the back of the pool house garage (use it for a little shade), but didn’t last week. Unfortunately some VERY high winds hit and stretched out my homemade bungee (steel cable inside rope) and bent the hooks […]
Yesterday morning was rushed, as I attempted to get a few things done in the backyard. I mowed the front yard on Friday night and was hoping to get the back done on Saturday — nope, the rain and thunderstorms arrived before lunch. BUT … I was able to at least use my new Worx […]
While contemplating a previous idea for a router guide (photo) … and waiting for paint to dry (it was raining on Saturday), I made a push sled for my router table. I’m not sure the hold down will really do much, but added it with a couple spare parts from my drill press table. Edit: […]
The previous “refined” Cornhole game project for my granddaughters worked out so well that I decided to make a modified set for Taylor’s birthday in June this year. Thankfully I started it early since I’m modifying the project just a little bit to work on mortise and tenon jointery … and have been busy outside […]
Although few of us getting older really want to spend too much time highlighting “yet another” birthday, last weekend was mine … so I celebrated by hauling 68 pounds of aluminum cans to the recycler (above). Since we were with KDAE the previous weekend … and Taylor stops in regularly (twice this past week) and […]
Over the weekend, I started a woodworking project that has been buzzing around in my head. There is no hurry to this side-table (mentioned previously), but wanted to use recycled hardwood rather than the particle board in the mass manufactured tables. This required a different design that I patterned after our antique octagon foyer table and […]
For years now, I’ve been planning to make a set of Cornhole boards for the backyard when entertaining in the summertime, but never really wanted to just slap together construction grade 2 x 4s and plywood. So when thinking about a project gift for my granddaughters 3rd and 6th birthdays this year, who are now […]
Instead of painting the entire woodworking project that is currently underway in the workshop, I want at least to be able to naturally lacquer finish the frames of the Cornhole game. Partially it is to show off the miters and walnut splines in the frame corners and partially because I didn’t want to use any […]
There are two projects sitting semi-started in the workshop this winter (delayed with Brenda’s hip fracture), although I’m still struggling to accept the VERY HIGH lumber prices. To be fair, I’ve always complained about buying lumber as no matter where it is purchased, it always seems far to high. But nowadays with inflation raging, it […]
This content is restricted.
Here’s a very short video highlighting several different kinds of popular wall anchors or mollies and how easy they are to use compared to each other. I saw it on social media and found it an interesting tidbit for woodworking or for those of us spending time in a workshop.
After a week of working with the new “trade-up” from an older Echo (triggered by a $30 trade-in offer) to the 4th generation Amazon Echo “with premium sound, smart home hub (Zigbee) and Alexa” … the results have been mixed. My advice, don’t rush. First, I was looking forward to the idea to not need […]
Brenda and I enjoyed our anniversary weekend staying around home, working in both the yard and for me painting on Sunday afternoon (Brenda helped out at a store short a pharmacist in Dayton). Slowly I’m making progress in painting the guest bedroom (pano photo below). Ceiling are done, walls have their first and second coat […]
Since I use these dovetail MicroJig clamps for woodworking in my workshop, it seemed only logical to archive a photo so I can build a "jointer jig" or perhaps more appropriately just a jig to use with the table saw for small tapers … or especially for cuts when the piece of wood isn’t flat […]
While ordering Titebond III glue in the 16 oz size (best choice for wood glue) from Walmart.com ($7.98) instead of Amazon, who happened to only have other sizes and bulk packaging (although gone is $67 Prime shipping), I needed to add another item to my order to avoid the shipping charges. The Kubota ZD326 zero-turn […]
I’ve been thinking a little bit more about workshop safety (although always do) and after posting about zero clearance throatplates the other day, I started contemplating adding a splitter to my table saw or to the insert when reading the Instructables.com article. Since my Delta Table Saw is pre-riving knife (below left), I either need to […]
When it comes to workshops, tools, jigs and helpers, we all have our go-to favorites and my 35 year old featherboard is no exception. For years now, I’ve told myself that I was going to make a new one since this was just a quick temporary one (like the miter saw hold down below), but […]
Something I’ve notice over the years is that today’s men have lost interest in what traditionally were seen as male hobbies and interests. My thought is that recent generation of men have abandoned working on cars in their garages and spending weekends with tools in their workshop (probably non-existent nowadays). They don’t fish and hunt […]
This content is restricted.
Archiving a couple office update photos after completing the crown molding, painting and “test” fitting of my new Samsung TV that Brenda bought me for Christmas. I also mounted the Yamaha soundbar on a couple special brackets so that the wires, etc remain behind the “skinny” television. As for the crown molding after making the […]
The hefty book (1139 pages) that I tried to finish by the end of 2021 is finally done (halfway into January 2022) … so now in that same World War II Pacific vein, I’m starting Martha MacCallum’s “Unknown Valor” this week. I remember hearing about it last year, but never added it to my to-read […]
It might not be a current movie (it’s 2011), but it was one neither Brenda or I watched over this past decade, but it was an excellent comedy. “The Big Year,” with Steve Martin, Owen Wilson and Jack Black (several others), was exactly what the “doctors” (Katelyn and Drew) ordered over our family Christmas. They […]
As usual, I was late in coming across a simple workshop miter guide for my table saw, although more recently something I needed for my small bandsaw. While working on a Christmas project for my granddaughter, I needed to cut a bunch of small pieces where I didn’t lose so much wood to the table […]
It has taken me a long time to cut into the outfeed table that I added to my Delta table saw in 2019, but I’ve finally added “the notch.” The spacing between the often used Shopsmith band saw and my lumber rack has always been tight … so tight that I’ve found myself angling it […]
Since part one of a couple of blog photo posts will be pubic and not include family, I’ll archive it first. I finished (hopefully) the NINE trailer loads of leaves I mulched and raked in the front yard this year. Oh for the pre-Global Warming and now Climate Change days of burning leaves rather than […]
Who really spends time looking at themselves in the mirror … at least the men that I know? BUT … I noticed my elbows when getting dressed last weekend … there is some disturbing sagging “grandpa skin” … “when did this happen?” On the other hand, I’m not alone and I suppose this is to […]
The Ridgid brand of cordless tools have been my choice for the home workshop for a few years now and until this past week I have had a positive experience. Earlier this year Ridgid even replaced a couple failing batteries under the LSA (Lifetime Service Agreement) … BUT now this brand of choice is a […]
This content is restricted.
When it comes to tools in the workshop, there are a few of them that I keep at arm’s length or in a small toolbox. The same goes for kitchen utensils and products. One of my favorites, if not thee favorite, is GLAD Press’n Seal® wrap (mentioned year’s ago when I still had a Keurig). […]
Weather and years (and abuse) has pretty much destroyed the gate, hinges and latches that I took off of the gate. I disassembled it in anticipation of our driveway project (I’m still waiting – they were delayed). The final disassemble and hauling to the back was on my weekend list, but I did not anticipate […]
A big thank you to my son Taylor for the Amazon gift card for my birthday last week. When he asked me what I was going to buy with it, I didn’t immediately have an answer … now I do … so I’ll now post a couple new woodworking workshop items that I’m using it […]
There’s not much a tools and gadget guy like me likes more than getting something new for my workshop. After breaking a bit in my cheap-ish countersink a few weeks ago (probably imported from China), I opted for a new Montana Brand Tools which are a USA-made set rather than just buying a new cheap […]
You can take the boy out of school, but you can’t take school (and learning) out of the boy ( or older man at this point). Over the weekend, I was talking to Brenda about how I’ve been following the NASA feed (tweet below) and waiting for the helicopter to take flight on Mars. The […]
This past week was an on and off work week. I’ve been struggling to update software and the latest Linux flavor on an old server while telling myself “I’m getting too old for this.” Right or wrong attitude, I think keeping up with fast-paced technology change is a young person’s game. On the plus side, […]
After setting up my router for better, cleaner and easier woodworking dados last week, I started thinking about something better than using my table saw’s stock miter gauge for making “coping” style end cuts on the router table. Beside a $220 commercial Coping-Jig (left), there are hundreds of homemade plans on the Internet to do […]
In keeping up with lithium battery powered tools, those of us who have married into a brand have our reasons (battery warranty in my case).In reading most of the comparison literature and write-up websites, Price and warranty aside, I would probably choose Milwaukee (and have for a couple 110 volt wired tools) as a rechargeable […]
My wife is great … and her decorating and building taste as to what “looks” nice grows on a person after nearly 40 years of marriage … but I still grumble about some of the decision she makes. One of them was wanting a drywall ceiling rather than something removable when we finished the basement. […]
This content is restricted.
On one of my sailing groups, a Sailrite Ultrafeed LSZ-1 user complained that the speed controller pedal was hard to regulate. I’ve found that to be true as well. Another person made the comment that they used a piece of flexible tubing/hose that gives the pedal a little more tactile feel … so I tried […]
The Sailrite LSZ-1 sewing machine cart is complete and turned out great. Everything worked as planned (a rarity for me) and didn’t have to purchase anything new. The wider oak material was sitting in my stock shelf, the edge banding for the fold out table stripped from the glass top of my recently disassembled printing […]
If you have ever used a heavy portable sewing machine, you know what a pain it is to haul it out of storage and set it up to make a simple repair. I don’t know how many times I’ve grumbled when Brenda wants me to set it on my workbench … or worse, haul it […]
Larry and Lin Pardey have been a couple of my sailing idols since I was in high school. Their life adventure, magazine articles and books have been a mainstay in keeping the cruising lifestyle close to my heart and in my dreams. I’ve posted a few times before regarding their philosophy and many skills, but […]
Let me get this out before someone tells me I’ve lost my mind: I love our current house and property in SW Ohio … as well as the community we live in just north of Cincinnati. Brenda and I could not be more blessed with our lives, our family and all that we have worked […]
This content is restricted.
This content is restricted.