RichC | November 9, 2024
The “yellow tape” applied to the table saw sled has bothered me since adding it in 2019 (above left). I’ve never had a problem remembering to keep my hands away from pushing the sled with my hand in the wrong place, but realized not having a guard was foolish (added above right). So a little […]
RichC | December 28, 2021
As usual, I was late in coming across a simple workshop miter guide for my table saw, although more recently something I needed for my small bandsaw. While working on a Christmas project for my granddaughter, I needed to cut a bunch of small pieces where I didn’t lose so much wood to the table […]
RichC | February 24, 2021
After setting up my router for better, cleaner and easier woodworking dados last week, I started thinking about something better than using my table saw’s stock miter gauge for making “coping” style end cuts on the router table. Beside a $220 commercial Coping-Jig (left), there are hundreds of homemade plans on the Internet to do […]
RichC | April 23, 2020
After cutting a few miter joints earlier this month with a 45 degree jig on my table saw crosscut sled, I started to contemplate the best way to cut clean tendons and dadoes. In the past I’ve used an added fence to the stock miter gauge, but it really doesn’t do a great job. Of […]
RichC | April 5, 2020
Snipped an idea for the woodworking workshop that I’m planning to add to my table saw crosscut sled .. nothing complicated, but a way to use geometry in order to make the perfect 45 degree jig for cutting frames. It is a way to use perfect squares to accurately cut the 45 degree jig. Check […]
RichC | March 29, 2020
This is a two-purpose post: A woodworking (sort of) bookshelves project archive update and shared information on a jig I made. First, the bookshelves and music room/ library painting coming along slowly. I’m bogged down with putty, sanding and painting after adding a strip light shield (wood to hide the LEDs that I’m planning to […]
RichC | December 10, 2019
After posting a photo of a table saw crosscut sled a couple weeks ago, I finally decided to finish the one I had been planning. In part because I had some extra 1/2” white finished plywood (I didn’t want to use the heavier 3/4”) and in part because I needed to cut a bunch of […]