Depressing loss for the Bengals against the Chiefs

Posted By on January 31, 2023

BengalsChiefs230129

I would be remise to not mention the the AFC playoff game that left Cincinnati Bengals fans out in the cold, unfortunately the excitement dwindles when your hometeam loses.

In my opinion, the Bengals were healthier and the better team going into the game against the Kansas City Chiefs, but as anyone who has watch Patrick Mahomes and the Chiefs play under the coaching of Andy Reid, they are an extremely talented team. Obviously even though they were not 100%, it was enough to push past Joe Burrow and the Bengals this year.

(more…)

Music Monday: A Little “Just Keep Livin” reggae by Mishka and Brenda’s hip replacement surgery and physical therapy update

Posted By on January 30, 2023

This content is restricted.

Routing corner splines on a woodworking project with a jig

Posted By on January 29, 2023

CornholeProjectVise230128Instead of painting the entire woodworking project that is currently underway in the workshop, I want at least to be able to naturally lacquer finish the frames of the Cornhole game. Partially it is to show off the miters and walnut splines in the frame corners and partially because I didn’t want to use any fasteners that could rust (unfortunately each corner has one brass screw to help with alignment). Still the 1/4” splines will do a great job in adding strength even though I used clear pine to reduce the weight (a couple “little” girls will hopefully be using these)? 

To help with the spline positioning, I made a jig that would clamp to each corner and repeat the exact same cut with my Makita router and 1/4” spiral bit. After a little experimented with scrap, it worked perfect. I cut walnut splines on the bandsaw sled (below) and new 45 degree miter gauge and used my portable belt sander to sand each spline flush. 

BandsawSled45angle230128

SplineRouterJif cutting230128 JigRouterCornerSplines230128

I’m so glad to have figured out the hole cutting and was thankful I had waterproof Titebond 3 glue and some stainless steel brads. 

CornholeCornerSplinesRough230128 CornholeCornerSplinesSanded230128

Our Echo Show continues to remind us of family

Posted By on January 28, 2023

This content is restricted.

Friday Filler: Flyover images of mountains on Pluto #space

Posted By on January 27, 2023

NewHorizonNasa

As a boy growing up enamored with the NASA Apollo program and going to the moon in the 1960s, I’m still a little peeved at Pluto’s demotion from planet status. Nevertheless, I’m amazed at the New Horizon spaceship’s video flying over the mountains of Pluto. Amazing and a worthwhile Friday Filler.

Markdown and rawhtml on a Hugo static page server

Posted By on January 26, 2023

Besides nursing duties and doctor visits with Brenda this past week, I’ve been working with a customer Hugonarrowlogo who would like to deploy a non-CMS website and completely forgot to post something on Thursday — making it up today. Although I’m partial to using an inexpensive Linux server with Apache and MySQL, he would like to use one of the lightweight static site generators. Since I’ve worked a little bit with Hugo in the past as a hobbyist, I demonstrated it and proceeded to head down a rabbit hole in trying to address the many limitations and how to still create a site that accomplished his goals (a learning curve was waste of several hours and an evening). 

Markdown is the preferred way to create content and once learned can be pretty powerful and quick. Unfortunately much of what we want to include nowadays bring in data that is easier to include as html. 

So I put together and reposted page from my WordPress blog on a Raspberry Pi running Linux and Hugo (the prior links may not remain alive all that long). 

RDCPersonalFont BrenichPost230126

Workshop Wednesday: Circle cutting with a router

Posted By on January 25, 2023

Hole In Project Router Circle Cutting

Over weekend of snowy Bengal – Bills playoff football, I was able to get down to the workshop and continue working on a joint granddaughters’ birthdays present. The project required larger holes than I have a hole saw for and cutting it with a jigsaw would have left an imperfect hole.

So … I used an odd baseplate from my Makita router and tapped a new “pivot” hole so that I could use my 1/4” spiral bit to gradually cut the circle. Since I only needed two equal holes, I just used the pivot point two times … but if I were going to do this again, I think cutting one in some 1/4” template material and using a bearing shanked bit would be preferred?

Anyway, the holes turned out great and I was even able to use the shopvac attached to the clear plastic chute to clear nearly all the dust and debris … something that never seems to go well for me (I usually make a mess).

(more…)

The Cincinnati Bengals to face Kansas City Chiefs again

Posted By on January 24, 2023

BengalsCoachTaylor2023

Just as the Cincinnati Bengals did last year in January 2022, they will be facing the Kansas City Chiefs again this year in the AFC Championship game after defeating the Bills in Buffalo on Sundayimpressively I might add.  Even though I was proudly wearing my Joe Burrows #9 jersey, the credit goes to every member of the Bengals. From coaching (Head Coach Zac Taylor above) to every player, they performed like a machine. Let’s just hope the Bengals can do the same as they have dial up a win against KC the last 3 times the teams have gone head to head.

BengalsBills230122

One advantage the Bengals have over the Chiefs this year is that QB Patrick Mahomes suffered a “high ankle sprain” in the playoff game against the Jaguars … this could prevent him from scrambling and being so effective. 

(more…)

Music Monday: David Crosby of CSN and CSNY will be missed

Posted By on January 23, 2023

CSN_2012_OnStage
Steven Stills, David Crosby and Graham Nash in concert in 2012

A depressing Music Monday today as music lovers remembered and reflected on the January 18, 2023 passing of the talented singer, guitarist and songwriter David Crosby. He impacted literally millions with is wonderful DavidCrosby_photobyAnnaWebbharmonies from the day he joined the Byrds in 1964 to the forming of Crosby, Stills and Nash (CSN) in 1968 and through the following decades.

Many of us were a bit too young in those early years, but definitely knew of and loved their music in the 1970s and later. Having Neil Young join the band (CSNY) and performing at Woodstock in the summer of 1969 cemented his legacy. A top ten list of folk-rock singers without David Crosby is rare as he collaborated with dozens of artists … including Joni Mitchell, James Taylor, Pink Floyd’s David Gilmour, Phil Collins, Elton John and Carole King.

He also had six solo albums and “formed a jazz-influenced trio with his son James Raymond and guitarist Jeff Pevar” (CPR), although to my shame, did not know about.

I may be a generation behind David Crosby and his peers, but I definitely loved his music and am thankful for his legacy of music for us to enjoy. Above is a live 1982 performance of “Wasted On The Way (my post from 2016) and for those wanted a little more, check out this YouTube video from 2012 singing CSN’s “Suite: Judy Blue Eyes.”

Collected a couple digital magazine workshop tidbits

Posted By on January 22, 2023

WoodworkersJournalMagReading periodicals RazorKnifeEdgeTipfrom the library on the computer is not really something I do … but last week while checking out a couple of ebooks (one avaiilable the other on a long hold),

I looked at the latest issue of the Woodworkers Journal magazine and realized just how much the iPad app for reading digital magazines has improved. I ended up reading it cover to cover and even “Smart Tagged” it to notify me when the next issue arrives. 

LibrarySmartTag

A few tidbits stood out and I decided to clip them and add them to MyDesultoryBlog more as a test of MarsEdit than anything else, but I did enjoy both the “sharp edge on a razor knife” tip and “tape trick” below. It was worth snipping as workshop advice

PlugTapeTip

Desultory - des-uhl-tawr-ee, -tohr-ee

  1. lacking in consistency, constancy, or visible order, disconnected; fitful: desultory conversation.
  2. digressing from or unconnected with the main subject; random: a desultory remark.
My Desultory Blog