RichC | April 15, 2020
Instead of spending time this past Easter weekend dressing,going to church and getting together with family, I spent a few more hours sanding … and sanding … and sanding. My goal is to get this old exterior black walnut door (super thick veneer over oak – see above photo) ready to take a traditional oil […]
RichC | April 10, 2020
Last week my son Taylor and friend Jeff both sent me their “homemade” stand-up or propped up (with books) notebook computers while working from home. I suspect they aren’t the only COVID19 “stay-at-home” workers trying to come up with comfortable ways to do their jobs? I know Jeff once had a stand-up desk at work […]
RichC | April 9, 2020
Last week while continuing to s-l-o-w-l-y work on the bookshelves and painting project, in-between outdoor yard cleanup and cutting the lawn for the first time in 2020, I also used the frame cutting miter jib previously mentioned. It is amazing just how much more accurate this set-up for my table saw crosscut sled is over […]
RichC | April 5, 2020
Snipped an idea for the woodworking workshop that I’m planning to add to my table saw crosscut sled .. nothing complicated, but a way to use geometry in order to make the perfect 45 degree jig for cutting frames. It is a way to use perfect squares to accurately cut the 45 degree jig. Check […]
RichC | March 29, 2020
This is a two-purpose post: A woodworking (sort of) bookshelves project archive update and shared information on a jig I made. First, the bookshelves and music room/ library painting coming along slowly. I’m bogged down with putty, sanding and painting after adding a strip light shield (wood to hide the LEDs that I’m planning to […]
RichC | March 8, 2020
While planning a long overdue bookcase woodworking project, I needed to learn a little more about edge banding. Previous bookcases that I’ve made have all been solid wood and either painted (in our first and second homes) or stained and poly finished oak (several book, CD, video and DVD case). This planned project is a […]
RichC | February 18, 2020
Here’s a Twofer Tuesday archive from a couple weekend photos on my phone: First, I tried to use Brenda’s grandfather’s handmade, and well worn, antique miter box to cut a couple pieces of trim .. but ended up using my powered Hitachi sliding miter saw to clean up the cut instead (I did use his […]
RichC | February 16, 2020
Although one could spend all day or night watching YouTube advice videos from expert woodworkers, I’ve limited my viewing to a few guys. I’m fond of Jon Peters for both the quality of his videos and for the short “focused” tips. In a recent YouTube video, he points out how often he finds himself using […]
RichC | February 4, 2020
This content is restricted.
RichC | January 23, 2020
It has taken years, but I’ve finally decided to move my woodworking bench dogs from the tool tray (see below). A bench dog is an accessory used on a woodworking workbench to allow clamping of wooden items while being worked or planed. Ever since building my work table and vices with bench dogs back in […]
RichC | January 4, 2020
This content is restricted.
RichC | December 28, 2019
Instead of cleaning the workshop as I was planning, I ended up sidetracked. Nothing new about that. Since each time I pull the plywood box full of “short cuts and scraps” out from next to the miter saw, it is as if I’m dragging a 100 pound box with sandpaper on the bottom across the […]
RichC | December 10, 2019
After posting a photo of a table saw crosscut sled a couple weeks ago, I finally decided to finish the one I had been planning. In part because I had some extra 1/2” white finished plywood (I didn’t want to use the heavier 3/4”) and in part because I needed to cut a bunch of […]
RichC | November 27, 2019
When we remodeled our kitchen in the spring of 2017, I disconnected the 40 amp 220 volt electric range that we originally had in the island, and dropped the capped wires through the floor and ceiling of my basement workshop. My intention was to eventually “drop” a 220 volt line so I would have a […]
RichC | November 24, 2019
While I was suppose to be cleaning up and throwing away junk that has taken over some of my basement woodworking shop, as usual ended up sidetracked in making a few jigs for my upcoming projects AND reorganized a couple of cabinets that were buried under boxes and clutter on a back wall. I moved […]
RichC | November 19, 2019
I spent the weekend wasting time reorganizing, sorting and cleaning up my woodworking workshop this past weekend and realizing I have a few older “semi-collectable” tools that I really should comment on … or as Brenda says, write my notes down in a book while I can still remember things. Now as I mentioned to […]
RichC | November 17, 2019
When it comes to clamping, I ascribe to the rule of thumb that you can never have too many clamps when woodworking. That said, I often don’t have enough when I’m working on a project … and lately it has been even worse since a few of my tools are in Florida (Condo1718 projects). Currently […]
RichC | September 21, 2019
While talking with my good friend Mark Jones about accurately drilling pin holes to mount a few glass shelves in a tight space, he gave me a great idea to use a piece of peg board to align all the holes accurately. Thanks Mark, a great tip! But in my case, I didn’t have a […]
RichC | March 26, 2019
After mentioning a distraction in working on my weekend projects last week, here was the project that was first on the list … something to deter the robins. My “keep the birds away” boxes to replace my yearly plastic coffee cans … and two of them with funky wires (photo left – I’ll have to […]
RichC | March 16, 2019
There are times when trying to hold or clamp irregularly shaped pieces can be difficult. Usually I resort to using my Jorgensen Handscrew clamps, but obviously with a little “old school” ingenuity, there are simpler ways! The photo above is one of those woodworking tidbit where a picture is worth a thousand words. For more […]
RichC | March 5, 2019
This content is restricted.
RichC | March 2, 2019
This content is restricted.
RichC | January 31, 2019
In my workshop there is a spot on the wall behind dad’s small drill press and my router table for old tools. As mentioned before, I use Brenda’s dads’ dental tools regularly and have put a few of DadH’s woodworking tools on the wall – it is too bad I passed on the dental chair. […]
RichC | January 27, 2019
After finally removing my built-in radial arm saw from my workbench, I was able to rework the area attached to my workbench in order to fit my “somewhat new” 12” Hitachi Miter Saw. With this new sliding miter saw, I no longer have a need for bulky power tool duplication, and as a workshop accumulates […]
RichC | December 24, 2018
This content is restricted.
RichC | November 18, 2018
This content is restricted.
RichC | October 9, 2018
One would think that will all the years that I’ve been tinkering with tools and woodworking that surely I would have made a few "hand-cut" dovetails? Nope, I’ve always used a simpler joint for hand made projects or for bigger "repeat" projects opted for a router and dovetail jig — which was handmade by me […]
RichC | September 4, 2018
This content is restricted.
RichC | November 22, 2017
Last summer I bought a 50-piece set of router bits to use in my woodshop and so far they have been great … that was up until I may have push the limits on a 3/16" straight cut bit a little too hard (possibly???). I only say "may" because the bit was mounted in my […]
RichC | August 24, 2017
This content is restricted.
RichC | August 13, 2017
The older I get the more often I stumble on items to include in my book, "Things To Buy When You Are Young" … or at least one that I’m slowly putting together and working on. I’ve fumbled with woodworking most of my life and to be fair, have purchased or been giving my share […]
RichC | December 14, 2016
I finally finished up a long overdue project for Taylor … a headboard for his bed. He had giving me a couple magazine images as to what he wanted, but I just haven’t found the time or put together the materials I needed to build it (let alone been ambitious enough to start the project). […]
RichC | March 4, 2016
One of my favorite YouTube channels is the Tips from a Shipwright with Louis Sauzedde. His helpful tool tips and how-to techniques are always worth listening to … even if I’m no where near the level of woodworker as are most wood boatbuilding advocates. If you sharpen any tool, the advice from Louis in how […]
RichC | May 17, 2015
Now this would be a great Kickstarter project.
RichC | December 18, 2013
When needing to make precise cuts or dadoes on the table saw, I have found that making them from the marine material Starboard is the best (shop around for price). Most likely the experts in woodworking have found other stock that would just as well, like the self-healing cutting board material, but since I had […]
RichC | February 11, 2013
Along with our flooded basement and BlueMax water line repair mentioned the last few days, the boring equipment the excavator used took out some of my fence. Although we just stained it again this year, the boards are starting to show their age and have split. I figured this might be a good time to […]
RichC | March 22, 2011
With hundreds of great woodworking sites on the web, it is difficult to know which ones are worth viewing whenever there is a new article. Most promote their published product or so overrun with advertising that it reminds me of going to a myspace page (mind you I haven’t gone to one in a few […]